Working at Heights Certification & Recertification Training
CPO-approved Working at Heights training for construction workers and trades in Barrie & Simcoe County. Meets the Ministry of Labour's program standard under the Occupational Health and Safety Act (OHSA).
Certification
Full Day (~8 Hours)
Validity
3-Year Certification
Compliance
OHSA & O. Reg. 213/91
Find the Right Training
Get course schedules, individual seats, or private group quotes in Barrie & Simcoe County.
Working at Heights Program Overview
This CPO-approved training program meets the Ministry of Labour's Working at Heights Training Program Standard and is required for workers on construction projects who may use a method of fall protection.
Mandatory Ontario Compliance
Under Ontario's Occupational Health and Safety Act (OHSA) and Regulation 213/91 (Construction Projects), employers must ensure workers who use fall protection systems complete a CPO-approved Working at Heights training program. Certification is valid for 3 years before recertification is required.
Two Training Options Available
Working at Heights Certification
A full-day (~8 hour) CPO-approved program for workers who have not previously completed Working at Heights training or whose certification has expired. Covers both theoretical knowledge and practical hands-on skills evaluation.
★ No prior experience required
★ Theory + practical evaluation
★ 3-year certification upon passing
Working at Heights Recertification
A half-day refresher program for workers whose current Working at Heights certification is approaching expiry (within 3 years). Updates knowledge of fall protection standards, equipment, and regulations.
★ Must hold valid, unexpired certification
★ Condensed refresher format
★ Re-issued 3-year certification
Industries & Trades We Train
Working at Heights training is essential for workers across construction, industrial, and trades sectors in Barrie & Simcoe County. If your team works above 3 metres, Ontario law requires CPO-approved fall protection certification.
Construction
- Roofers & framers
- Scaffolders & ironworkers
- General contractors
- Home builders & renovators
Industrial
- Manufacturing & plant workers
- Warehouse & logistics
- Oil & gas sector
- Mining & aggregates
Skilled Trades
- Electricians & solar installers
- HVAC & mechanical
- Painters & window cleaners
- Telecom & signage technicians
Group & Corporate Training: We offer on-site Working at Heights training for entire crews and companies across Barrie, Newmarket, Orillia, Midland, Collingwood & Bradford.
Training Curriculum & Topics Covered
The Working at Heights Training Program Standard requires both theoretical and practical training modules covering:
Rights & Responsibilities
OHSA rights, employer/worker duties, and recognition of fall hazards under the law
Identification of Fall Hazards
Recognizing fall hazards on construction sites including roofs, scaffolds, ladders & openings
Elimination & Hazard Control
Hierarchy of controls, eliminating fall hazards, and selecting appropriate protective measures
Warning Methods & Physical Barriers
Use of guardrails, travel restraint systems, warning barriers and control zones
Fall Protection Equipment
Full body harnesses, lanyards, lifelines, anchor points, and connecting components
Equipment Inspection & Care
Pre-use inspection, defect identification, maintenance, storage, and equipment retirement
Anchor Points & Anchor Systems
Selecting and verifying suitable anchor points; minimum breaking strength requirements
Rescue Planning
Developing a fall rescue plan, suspension trauma awareness, and emergency response procedures
Practical Hands-On Evaluation
In addition to the theoretical component, all participants must successfully complete a practical evaluation demonstrating competence in:
- Harness Donning & Fit: Properly inspect and put on a full body harness with correct adjustment.
- Equipment Inspection: Perform a pre-use inspection of lanyards, lifelines, and connecting hardware.
- Anchor Selection: Identify and connect to appropriate anchor points meeting load requirements.
- Fall Arrest vs. Travel Restraint: Demonstrate proper use of both systems in simulated scenarios.
Completion & Certification Requirements
- Attendance: Attend and participate in 100% of the training program.
- Written Evaluation: Achieve a passing score on the written knowledge assessment.
- Practical Demonstration: Successfully complete the hands-on practical evaluation of fall protection skills.
- CPO Certification: Receive a Chief Prevention Officer (CPO) approved certification valid for 3 years.
Working at Heights Training
Ministry of Labour Recognized Certification
Who Needs This Training:
- • Construction workers & contractors
- • Industrial & manufacturing crews
- • Electricians, HVAC & trades
- • Roofers, framers & scaffolders
Reserve Your Working at Heights Seat
Complete the form below and our team will confirm availability and course dates for Working at Heights certification or recertification in Barrie & Simcoe County.
Find the Right Training
Get course schedules, individual seats, or private group quotes in Barrie & Simcoe County.
Frequently Asked Questions
Common questions about Working at Heights certification, recertification, and group training in Barrie & Simcoe County.
Have a specific question not listed here?
Our safety training coordinators in Barrie are ready to help you select the exact course or configure group training for your team.